Comma-separated verbose name of the database servers.
It will be included in the RSS file generated by weeWX and, if you choose to opt into the station registryit will also be included in the map of weewx stations.
Set to the start of your rain year, for example, 10, if your rain year starts in October as mine does.
It will sleep between emitting packets. An example would be T This would code March, at 6: Default is the present time. Other stationsuse the MS sensor, which requires a different calculation to determine the pressure and temperature from the sensor.
A value of False causes the driver to use a linear approximation, regardless of the type of sensors. The default is True.
The default is 1 second. Two additional temperature sensors are supported. For example, this would associate extraTemp1 with the second optional temperature sensor: The following settings are highly recommended for Fine Offset stations.
Using hardware record generation or adaptive polling is more likely to cause USB communication failure. Using hardware record generation will cause delays in report generation.
See the section Polling Mode and interval in the Hardware Guide for more details. Possible values are for the 10xx and 20xx consoles and for the 30xx consoles. Up to 5 remote sensors are supported. A switch on each sensor determines which of 5 channels that sensor will use.
For example, this would associate outTemp and outHumidity with sensor 4: For example, Ultimeter or Ultimeter The default is Default is 1 second. This is used in the formula to calculate reception quality for wireless stations. Default is 5 seconds. Unless you have a good reason to change it, this value should be left at the default, as it is long enough for the station to offer new data, but not so long as to go into a new loop packet which arrive every 2 seconds.
Default is 60 seconds. The wmr hardware records archive data at an immutable rate of 60 seconds. This field may be set to a higher value enabling the weeWX engine to coalesce live data packets. However, when the wmr is not connected to a system via USB or if the weeWX software is not running, the wmr console will continue to store weather data in onboard console memory at a fixed rate of 60 seconds.
This field specifies when to transition from archive mode to live mode. This transition occurs when no archive packets are detected within this time interval. Default is seconds. The archive packets are presented in sequential order typically timestamped 60 seconds apart.
However, there is no guarantee the archive packets are exactly 60 seconds apart. Should an incoming archive data packet timestamp exceed the previous archive data packet one by the amount in this field it will be dropped.
Default is seconds 1 week. Up to 8 remote sensors are supported. Default is "LaCrosse WS23xx". When connected with a wire, the console updates sensor data every 8 seconds. When connected wirelessly, the console updates from 16 to seconds, depending on sensor activity.
Specify either US or EU.
Default is "LaCrosse WS28xx".Hi, there is a FAQ available here explaining all reasons for this datadir permission issue. Can’t write into config directory! This can usually be fixed by giving the webserver write access to the config directory.
Oddly enough, apache IS the owner of the config directory and underlaying files. Configuration.
The Grafana back-end has a number of configuration options that can be specified in ashio-midori.com configuration file or specified using environment variables.. Note. Grafana needs to be restarted for any configuration changes to take effect. CentOS - Issue with write permissions. Ask Question.
Permissions should be , so that only the user apache and group apache can access the directory. – slm @DextrousDave - the file permissions don't really have anything to do with someone accessing a page through the webserver. Remember that the webserver is a process . Hi, there is a FAQ available here explaining all reasons for this datadir permission issue.
Handlers > 09/26/; 7 minutes to read Contributors. In this article. Overview. The handlers> element defines the handlers registered for a specific file name extension or URL..
Handlers are Internet Information Services (IIS) components that are configured to process requests to specific content, typically to generate a response for the request resource.